IDEAL COMBI ESP 24 Pocket Manual page 35

OPERATIONS MODE.
DISPLAY CODE
ON THE BOILER
FAULT CODES.
DISPLAY CODE ON THE BOILER
DESCRIPTION
The boiler is in standby mode awaiting either a central heating call or hot water
demand.
The boiler has a call for central heating / hot water but the appliance has reached the
desired temperature set on the boiler.
The boiler is operating for central heating / hot water.
The boiler is operating in frost mode.
DESCRIPTION ACTION
BCC activation fault Reset the appliance - if the boiler fails to operate then please
contact Ideal (if under warranty) or alternatively a Gas Safe
Registered Engineer if outside of the warranty period. In IE
contact a Registered Gas Installer (RGII).
BCC fault Reset the appliance - if the boiler fails to operate then please
contact Ideal (if under warranty) or alternatively a Gas Safe
Registered Engineer if outside of the warranty period. In IE
contact a Registered Gas Installer (RGII).
Unconfigured PCB Reset the appliance - if the boiler fails to operate then please
contact Ideal (if under warranty) or alternatively a Gas Safe
Registered Engineer if outside of the warranty period. In IE
contact a Registered Gas Installer (RGII).
Flame loss See Action - Fault Code L 2.
35