Paper Creases - Canon LBP7100Cn User Manual

0F40-08J

Paper Creases

Perform one of the following solutions according to the cause.
<Cause 1> The paper is not loaded properly.
Load the paper properly.
Solution
"Loading Paper"
<Cause 2> Damp paper is used.
Replace the paper with new paper in an unopened package.
Solution
"Precautions for Paper"
<Cause 3> Appropriate paper is not being used.
Replace the paper with that which can be used with this printer.
Solution
"Usable Paper"
<Cause 4> There is a foreign object inside the printer.
Solution Remove the foreign object inside the printer.
<Cause 5> When 60 to 74 g/m² paper is printed, depending on the operating environment
(especially in a high-humidity environment), the paper may be creased.
Perform the following procedure in the printer driver.
1. Display the [Paper Source] sheet.
2. Set [Paper Type] to [Thin 2].
Solution 1
Perform the following procedure in the Printer Status Window.
1. Display the Printer Status Window.
2.
Solution 2
3. Select the [Perform Curl Correction for Output Paper] check box.
If you change the settings, the toner may not fix onto paper well, and the printing may come out
faint.
"Printer Status Window"
[Perform Curl Correction for Output Paper] is enabled only when [Paper Type] in the [Paper
Source] sheet in the printer driver is set to [Thin 1].