[Authentication
Algorithm]
[Encryption
Algorithm]
[Context Settings]
[Context Name 1]
[Context Name 2]
[Context Name 3]
7
Specify whether or not to obtain the printer management information as needed.
[Obtain Printer
Management
Information from
Host]
8
Click [OK].
SHA1 is used.
To set or change the authentication password
Select the [Set/Change Password] check box, and then enter the password to
[Authentication Password] and [Confirm].
You can enter 6 to 16 single-byte alphanumeric characters.
Select the encryption algorithm.
[DES]
DES is used.
[AES]
AES is used.
To set or change the encryption password
Select the [Set/Change Password] check box, and then enter the password to [Encryption
Password] and [Confirm].
You can enter 6 to 16 single-byte alphanumeric characters.
Enter a context name to be used in the SNMPv3 protocol. You can enter up to 32 single-byte
alphanumeric characters.
Select the check box if you want to periodically obtain the printer management information such
as print applications and ports from host computers on the network by using SNMP.