Canon LBP7100Cn User Manual page 136

*1
The setting is located in the [Paper Source] sheet in the printer driver.
*2
Recycled paper can be also used.
*3
If you want to print paper of 75 to 85 g/m², you can specify either of [Plain 1] or [Plain 2].
*4
You can load paper of the following custom paper sizes.
In case of portrait orientation: Width 83.0 to 215.9 mm, Length (Height) 127.0 to 355.6 mm
In case of landscape orientation: Width 127.0 to 215.9 mm, Length (Height) 127.0 to 215.9 mm
*5
If you want to print paper of 86 to 90 g/m², you can specify either of [Plain 2] or [Heavy 1].
*6
If the printed paper curls (the printed side curls outward) when 60 g/m² paper is printed with [Thin 1] selected, select
[Thin 2].
*7
If you want to improve the toner fixation when printed with [Envelope] selected, select [Envelope H].
*8
Specify the setting as follows for coated paper.
100 to 110 g/m²: [Coated 1]
111 to 130 g/m²: [Coated 2]
131 to 160 g/m²: [Coated 3]
161 to 220 g/m²: [Coated 4]
*9
If either setting causes the following problems and so on, specify the other setting to print.
Output paper curls.
Residual images appear on non-printed areas.
The toner does not fix onto paper well, and the printing comes out faint.
IMPORTANT
About print speed
The print speed may drop depending on the paper settings for the size, type, orientation, and number of copies.
When continuously printing paper whose width is less than 190 mm, the print speed may drop gradually.
Precautions for paper
"Precautions for Paper"
NOTE
Printable area
"Printable Area"
Envelope sizes
The envelope sizes are as follows.
Envelope Monarch
Envelope No. 10 (COM10)
Envelope DL
Envelope C5
98.4 mm x 190.5 mm
104.7 mm x 241.3 mm
110.0 mm x 220.0 mm
162.0 mm x 229.0 mm
Foolscap
16K
*4
Custom Paper Size
*9
*9