[Validity Start Date]
[Validity End Date]
[Country/Region]
[State]
[City]
[Organization]
[Organization Unit]
[Common Name]
7
Click [OK] to start creation of a key and certificate.
It takes approximately 10 to 15 minutes to create a key and certificate depending on the length of the key to be
created.
Specify the date on which the validity of the certificate starts. Enter the date (January 1, 2000
to December 31, 2037).
Specify the date on which the validity of the certificate ends. Enter the date (January 1, 2000 to
December 31, 2037).
Specify the country/region name.
When selecting the country/region from a list of registered country codes
Select the [Select Country/Region Name] check box, and then select the country/region
name from the pull-down menu.
When directly entering an Internet country code
Select the [Enter Internet Country Code] check box, and then enter the Internet country
code.
Enter the state name. You can enter up to 24 single-byte alphanumeric characters.
Enter the city name. You can enter up to 24 single-byte alphanumeric characters.
Enter the organization name. You can enter up to 24 single-byte alphanumeric characters.
Enter the unit of the organization such as a department name. You can enter up to 24 single-
byte alphanumeric characters.
Enter the IP address or FQDN (in the format such as xyz.company.com) of the printer. You can
enter up to 48 single-byte alphanumeric characters.