Canon LBP7100Cn User Manual page 357

[Use SNMPv3]
[User Settings 1]/[User Settings 2]/[User Settings 3]
[Enable User]
[User Name]
[MIB Access
Permission]
[Security
Settings]
Select the check box to use the SNMPv3 protocol.
Select the check box if you want to register/edit user information or enable the registered user
information.
Enter the user name to be used for the SNMPv3 protocol. You can enter up to 32 single-byte
alphanumeric characters.
Specify the MIB access authority. When both reading and writing are permitted, a user can
access the printer from a computer on the network and change settings.
[Read/Write]
Both reading and writing are permitted.
[Read Only]
Reading only is permitted.
Specify the security settings.
[Authentication On/Encryption On]
Both authentication and encryption are adopted.
[Authentication On/Encryption Off]
Only authentication is adopted.
[Authentication Off/Encryption Off]
Neither authentication nor encryption is adopted.
Select the algorithm to be used for authentication.
[MD5]
MD5 is used.
[SHA1]