Residual Images Appear On Non-Printed Areas - Canon LBP7100Cn User Manual

0F40-093

Residual Images Appear on Non-printed Areas

Perform one of the following solutions according to the cause.
<Cause 1> Appropriate paper is not being used.
Replace the paper with that which can be used with this printer.
Solution
"Usable Paper"
<Cause 2> When 60 to 74 g/m² paper is printed, depending on the operating environment
(especially in a high-humidity environment), residual images may appear.
Perform the following procedure in the printer driver.
1. Display the [Paper Source] sheet.
2. Set [Paper Type] to [Thin 2].
Solution 1
Perform the following procedure in the Printer Status Window.
1. Display the Printer Status Window.
2.
Solution 2
3. Select the [Perform Curl Correction for Output Paper] check box.
<Cause 3> The drum in any of the toner cartridges has deteriorated.
Replace the toner cartridges with new ones.
Solution
"Replacing the Toner Cartridge"
If you change the settings, the toner may not fix onto paper well, and the printing may come out
faint.
"Printer Status Window"
[Perform Curl Correction for Output Paper] is enabled only when [Paper Type] in the [Paper
Source] sheet in the printer driver is set to [Thin 1].