[LPD]
[RAW]
[HTTP]
[SNMP]
[WSD Multicast Discovery]
[Multicast Discovery]
Proceed to Step
MTU Size Settings
(1) Specify the MTU size.
(2) Click [OK].
[MTU Size]
Proceed to Step
Enter the LPD port number.
Enter the RAW port number.
Enter the HTTP port number.
Enter the SNMP port number.
Enter the WSD multicast discovery port number.
Enter the multicast discovery (SLP) port number.
3
if you do not specify the settings for the other options.
Select the MTU size.
3
if you do not specify the settings for the other options.