Switching Between Wireless Lan And Wired Lan For The Connection (Lbp7110Cw Only) - Canon LBP7100Cn User Manual

0F40-053
Switching Between Wireless LAN and Wired LAN for the Connection
(LBP7110Cw Only)
The wired LAN connection is set by default.
Switching from Wired LAN to Wireless LAN
Perform the following procedure.
1. If the printer driver is installed, uninstall it.
"Uninstalling the Printer Driver"
2. Using "Easy Installation" to specify the settings of the wireless LAN connection and install the
printer driver
"Easy Installation"
You can specify the printer connection settings and install the printer driver using "Easy Installation" as a
series of operations.
NOTE
You cannot use a wired LAN and wireless LAN at the same time.
When using the printer with a wireless LAN connection, do not connect a LAN cable to the printer. This may result in
malfunction.
Switching from Wireless LAN to Wired LAN
Perform the following procedure.
1. If the printer driver is installed, uninstall it.
"Uninstalling the Printer Driver"
2. Using "Easy Installation" to specify the settings of the wired LAN connection and install the
printer driver
"Easy Installation"
You can specify the printer connection settings and install the printer driver using "Easy Installation" as a
series of operations.
To specify the printer connection settings, select [Custom Setup].
To set a port and install the printer driver from the printer folder, specify the printer connection settings (
"Specifying the Connection
the printer driver.
Settings"), and then see "Setting a Port and Installing the Printer Driver" to install