Connecting The Telephone To A Pc - Auerswald COMfortel 3200 Setup Manual

Commissioning

Connecting the Telephone to a PC

Requirements
– A PC with the following features:
– PC and telephone in the same network
– A telephone, put into operation
– Patch cable
Steps to Take
1.
Switch the PC on.
2.
Insert a plug (RJ-45) of the patch cable into the jack labelled with
lower side of the telephone.
Important: If you connect a PC to the socket on the bottom of the
telephone that is labelled with
3.
Insert the other plug (RJ-45) of the patch cable into the network connection
port of your PC.
66
Intel Pentium 1 GHz or compatible processor
Windows Vista 32-/64-bit (Service Pack 2 or higher), Windows 7 32-/64-
bit, Windows 8/8.1 32-/64-Bit, Mac OS X (10.4 or higher), Linux (Kernel
2.6 or higher)
Memory (RAM: 256 MB, recommended 512 MB; for Windows Vista/
Windows 7/Windows 8/8.1: 1 GB, 64-bit 2 GB
Browser for the configuration: Recommended is Mozilla Firefox (current
version)
Network card (the PC must be equipped with a network interface card
and the required driver has to be installed)
Internet protocol TCP/IP (Transmission Control Protocol/Internet Proto-
col)
Mouse or compatible pointing device
SVGA graphics card with a resolution of 1024 x 768, recommended
1280 x 1024, and 65536 colours (16 bit)
Take note of the socket labels.
, this will result in disruptions in operation.
COMfortel 3200/3500 - Firmware Version 1.8B - Setup Guide 04 02/14
on the