Compact 5010 Voip; Compact 5020 Voip; Compact 5000/R; Commander Basic.2 (19") - Auerswald COMfortel 3200 Setup Manual

Hide thumbs Also See for COMfortel 3200:

Operation manual (704 pages)

Operation manual (717 pages)

Short operation instructions (2 pages)

Table of Contents

Available languages

Important Information

For the operation as an Auerswald system telephone, one of the following

Auerswald PBXs is required:

Important: To support the COMfortel 3200/3500, the PBXs require at least

the following firmware version:

COMpact 5010 VoIP, COMpact 5020 VoIP, COMmander Basic.2 (19"),

COMmander Business (19"): 4.2A

COMpact 5000/R: 6.2A

COMmander 6000/R/RX: 5.4A

The telephone is corded and is intended for use in closed, dry rooms.

The telephone is equipped with a touchscreen. It is operated on the basis of the

operating system Android 2.3. Alternatively, the telephone can be operated by

means of keys.

The telephone allows you to make calls by using both the connected receiver

and the integrated loudspeakers (hands-free calling). Another option is to con-

nect a headset (not included in the package).

The telephone supports the operation of cable-connected headsets as well as

cordless headsets (headsets with a DHSG interface, for example, from

Auerswald, Jabra, or Plantronics, as well as Bluetooth headsets).

The telephone permits the operation of numerous functions. This cannot only

be controlled via the display, but also via 20 programmable function keys (5 of

them touch function keys at the display). These can be used to execute func-

tions by simply pressing the corresponding function key.

Up to three COMfortel Xtension300 key extension modules (not included in the

delivery) can be attached to the telephone in order to add programmable func-

tion keys. The modules are assembled at the right side of the telephone. A com-

pletely extended system provides 110 programmable function keys (including

touch function keys).

The telephone can be configured in three different ways: in display-controlled

mode at the telephone itself, via the configuration manager, or in automated

mode from a provisioning server. The configuration manager is accessible via

the integrated Web server in the telephone. The required PC is connected either

directly to an network port on the telephone or must be located in the same