Clean The Grooves Procedure - Vision Fitness Vision series Service Manual

Frequency:
Procedure:
If dirty grooves in the drive belt, motor and roller pulley, there will be noises while running.

CLEAN THE GROOVES PROCEDURE

Every 3 months.
1 Remove the drive belt and
check the grooves in belt for dirt
or dust and clean it.
2
Check the grooves in motor
pulley for dirt or dust and clean it.
3
Check the grooves in roller
pulley for dirt or dust and clean it.
1-4 Revision: 1.0 Date: 2001-06-01