Vision Fitness Vision series Service Manual page 52

RUNNING BELT/DECK/ROLLER REPLACEMENT
Tools required:
ü Philips screwdriver
ü T-handle key (6mm,5mm)
Procedure:
1. Remove the screws from the front cover by using the
screwdriver.
2. Remove two rear plates from the end of the side rails.
3. Pull out the two side rails.
4. Elevate the machine to a proper height for removing the
front roller.
7-8
(T7400/8400/8500/8600)
Revision: 1.0 Date: 2001-06-01