Mcb (T7400/8400/8500/8600); Mcb(T7200/8200) - Vision Fitness Vision series Service Manual

MCB REPLACEMENT
Tools required:
ü Philips screwdriver
Procedure:
5. Reconnect all the cables and wires to the MCB by referring to the wiring diagram.
6. Enter the engineering mode, recalibrate the speed of the treadmill.
7. Install the motor cover.
(T7400/8400/8500/8600)
1. With the screwdriver remove the motor cover.
2. Unplug all the cables and wires connecting to the
MCB.
3. With the screwdriver remove the MCB.
4. Replace the MCB and tighten the screws holding
the MCB to the frame.
7-1 Revision: 1.0 Date: 2001-06-01