Contrast Setting; Filter Sign Setting; Filter Sign Reset Setting; Display Setting - Fujitsu ARTG45LDTA Operation Manual

z 5-3-3. Contrast setting
1
In "Screen" screen, select [Contrast] with the [Cursor
button (Left/Right)], and set with the [Cursor button (Up/
Down)].
Screen
Automatic
off time
30
S
Cancel:
Date and time
NOTE
• The set is reflected while setting it.
2
Other screen setting items can be set continually. To
complete the setting, press the [Enter button].
Screen returns to the "Submenu" screen.

5-4. Filter sign setting

NOTE
• This function can be used only if the setting is activated in
the installation. To activate this function, consult authorized
service personnel.
In "Submenu" screen, select [Filter sign] with the [Cursor but-
ton (Up/Down)], and press the [Enter button].
Submenu
[ 1/2 ]
Date and time
Screen
Filter sign
R.C. sensor control
Room temp. display
Back:
Monitor
"Filter sign" screen is displayed.
Filter sign
Filter sign reset
Display
Back:
Screen
9381067121_OM_EN.indd 24
Mo 10:00
Brightness Contrast
OK:
Filter sign
Mo 10:00
Off
Off
Setting:
Mo 10:00
Off
Setting:
Initial
z 5-4-1. Filter sign reset setting
If filter sign icon is displayed on the "Monitor" screen,
clean the air filter on the relevant indoor unit first, and then
reset the filter sign as follows:
NOTE
• Before resetting the filter sign on this remote controller,
clean the air filter on the relevant indoor unit. Refer to
"7. CLEANING AND CARE".
1
In the "Filter sign" screen, select [Filter sign reset] with the
[Cursor button (Up/Down)], and press the [Enter button].
Filter sign
Filter sign reset
Display
Back: Setting:
Screen
Following screen is displayed.
The filter sign will be reset. OK?
No
2
Select [Yes] or [No] with the [Cursor button (Left/Right)],
and press the [Enter button].
When [Yes] is selected, the filter sign icon on the display
is turned off.
z 5-4-2. Display setting
11
You can select [On] (display) or [Off] (non-display) for the filter
sign icon indication.
NOTE
• When you set this setting to [Off], the filter sign icon will not
be displayed regardless of the necessity of filter cleaning on
the indoor unit.
1
In the "Filter sign" screen, select [Display] with the [Cursor
button (Up/Down)], and press the [Enter button].
Following screen is displayed.
Filter sign
Filter sign reset
Display
Back: Setting:
Screen
Mo 10:00
On
Initial
Yes
Mo 10:00
Off
Initial
En-24
07-Aug-15 13:41:10