Setting Items In Submenu - Fujitsu ARTG45LDTA Operation Manual

2-3. Setting items in Submenu

Monitor
Mode Set temp.
26
° C
Cool
Menu
Following items can be adjusted in Submenu.
NOTES
• Function marked "–" in "Secondary unit" column of following table cannot be adjusted from the remote controller that is specified
as the secondary control unit. Adjust the function on the primary unit.
• Depending on the type of the indoor unit, some functions cannot be set.
Settings and Display Items
Date and Date
time
Time
Summer time
Daylight saving time
Change display format The display format for the date and time can be changed.
Screen
1
Filter sign* Filter sign reset
Display
R.C. (Remote Controller) sensor
1, 2
control* *
Room temp. (temperature) display
Key lock Child lock
select
Part lock
Initial Language* 2
Temp. (Temperature)
unit
Password setting
Management
Zone user Day/Night setting
3
setting*
Name setting
1
* : F unctions set to inactive at the factory, and they are not displayed on the "Submenu" screen. To activate these functions,
consult authorized service personnel.
2
* : D edicated functions for non-zone-controlled system.
3
* : D edicated function for zone-controlled system.
En-9
9381067121_OM_EN.indd 9
Menu
Mo 10:00
Function
Fan
Timer
High
Back:
Submenu
Sets and corrects the date.
Sets and corrects the time.
Sets or cancels daylight saving time.
The LCD backlight time, backlight brightness, and LCD contrast can be
changed.
Removes the filter sign.
Switches between displaying and non-displaying the filter sign.
The room temperature sensor of the indoor unit can be switched to the
room temperature sensor that is built into this remote controller.
NOTE
•
This setting can be set on either of one of the primary unit or the
secondary unit.
Switches between displaying and non-displaying the room temperature.
The displayed room temperature is the temperature around the remote control.
Restricts all the button operation.
Restricts the [Menu button] operation.
Switches the display language of the remote control.
The following languages can be selected: English, German, French,
Spanish, Italian, Greek, Russian, Portuguese, and Turkish.
Switches the set temperature and the room temperature display
between Celsius and Fahrenheit.
Password for "Management" function setting can be set.
(Refer to the installation manual.)
Restricts the operations of some functions by non-authorized person.
With the password control, only the administrator can get access to the
function setting.
(Refer to the installation manual.)
Enables the simultaneous setting of zone(s) and room-temperature sensor reg-
istered into two groups that you might have different lifestyle; "Day" and "Night".
Enables registration of desired name for each zone, group, and room-
temperature sensor.
Mo 10:00
Setting:
Details
Submenu
[ 1/2 ] Mo 10:00
Date and time
Screen
Filter sign
R.C. sensor control Off
Room temp. display Off
Back: Setting:
Monitor
Submenu
2/2 Mo 10:00
Key lock select Child lock
Initial
Management
Back: Setting:
Monitor
Operation Second-
(See page) ary unit
21 O
22 O
22 O
22 O
23 O
24 O
24 O
25 O
25 O
26 O
26 O
26 O
27 O
- O
- O
27 –
28 O
07-Aug-15 13:40:58