11) Check / adjust timing
Check:
1. Align the flywheel "T" mark to a triangular sign on
the timing window of the right crankcase.
△Note: Torque, T=0.9~1.1kg-m
2. Check if the mark for the upper dead center of the
camshaft sprocket is aligned to the mark "→" on the
cylinder head.
Adjust
1. Tighten the adjusting screw of the chain adjuster to
loose the chain. Remove the set screw on the camshaft
sprocket; align the mark of the upper dead center on
the camshaft sprocket to "→". Install all parts in a
reverse order.
Check & Adjustment
Align the flywheel mark to
the triangular sign on the
timing window of the right
crankcase for the piston at
the upper dead center.
Timing window
Set screws on the camshaft sprocket
41
Chain adjuster
Mark of the upper
dead center
3