V Belt Driver; Left Cover / Drive Belt Assembly - PGO Tigra AF-125BAE Service Manual

Left cover / drive belt assembly

A. Remove 3 set screws on the left cover cap and take
out it.
B. Remove 9 set screws on the left cover and take out
it.
C. Remove 1 set nut on the front drive unit and take
out parts such as drive flank, mobile drive flank,
mobile drive flank hub, and sleeve. Remove 1 set
nut on the rear drive unit and take out parts such as
bearing sleeve, clutch housing, driven belt pulley,
and belt.
Installation
1. Install the said parts in a reverse order.
2. Cautiously handle the belt during assembly.
A. Characters on the belt should point the
driving direction.
B. To avoid a drive flank wrongly locked,
the driven belt pulley should be
inserted first and allows the belt to be
loosened during the drive flank
attached.
Set screws
Set screws
Belt
Drive flank Mobile drive
flank hub
O-rings
Bearing sleeve Clutch
housing
57

V Belt Driver

Mobile Spacer
drive flank ring
Clutch Driven belt
pulley
Driving direction
8