3.
Securely fix the right crankcase with the puller hammer installed for the bearing pulled out.
Evaluation and measurement of a removed crankshaft
1.
Check the connecting rod for any noise attributed to large radial and axial clearances of a running
crankshaft. Replace the useless crankshaft assembly with a new one if necessary.
2.
Check the bearing for any noise attributed to large radial and axial clearances of a running bearing.
Replace the useless bearing (or crankshaft assembly) with a new one if necessary.
Check axial and radial
clearances
Crankcase & Crankshaft 9
Check a bearing
63