1) Separate the engine from the vehicle body
Procedure:
1. Remove the luggage compartment
2. Disconnect the engine wiring harness; remove the spark plug cap
Disconnect the sensor cable
3. Disassemble the exhauster
Disassembly of the Engine Assembly 5
Remove parts as
follows: nozzle, engine
temperature sensor,
throttle valve sensor,
idle controller, and
oxygen sensor.
Disconnect the
engine ground
cable on the
right crankcase.
Please keep watch for no Lambda sensor collided and damaged during
removal of the exhauster.
47
Disconnect
cables for the
generator and
the crank angle
sensor.
Disconnect the
power line
linked to the
start motor.