Change Brake Oil; Valve Clearance Check - PGO Tigra AF-125BAE Service Manual

Change brake oil

Steps:
1. Loose the drain plug bolt.
2. Use an oil pump to draw used oil.
3. Add new oil.
4. Use an oil pump to evacuate air in the oil hose; keep
the oil cup not empty during evacuation.
5. Tighten the drain plug bolt.
6. Check back-play of the brake. If unconformable,
repeat the previous steps to evacuate air.
10) Valve clearance
Check valve clearance.
Tool: Thickness gauge; wrench for adjustment of valve
Method: Adjust the piston to the upper dead center
(Flywheel "T" mark=Timing); use the thickness
gauge to check the valve clearance within the spec.
Adjustment: Loose the set screw and turn the adjusting
screw within the spec. in the event of the valve
clearance incorrect.
Valve clearance:
IN: 0.10mm
EX: 0.10mm
△Note: Check and adjust the valve clearance when the motorcycle is not started or the engine temperature is
low.
△Note: Torque to adjust the nut for the valve clearance, T=0.7kg-m.
Check & Adjustment
40
3