Spark Plug Check; Front Lamp Adjustment - PGO Tigra AF-125BAE Service Manual

6) Spark plug
Check
1. Use a spark plug socket to remove the spark plug.
2. Check the spark plug for damage, filth, or carbon
deposition.
3. Use carbon remover or a steel brush to clean any filth
or deposited carbon.
Specific model: CR7E NGK or similar substitute
Spark plug gap: 0.6~0.7mm
7) Front lamp
Adjustment:
Keep the front handlebar cover assembled; insert a Phillips
screwdriver into a prepared hole in the lower left corner of
the front handlebar cover and turn a screw to adjust the
angle of projection. The beam to be projected could be
changed by moving the reflecting plane's angle upward or
downward.
Lamp spec.: H4 12V 50W/55W
Turn up
Adjusting screw to change angles of beam projected
34
Check & Adjustment
0.6~0.7mm
0.6~0.7
Turn
down
3