Brake Fluid Check - PGO User Manual

BRAKE PAD CHECK
Please acting the brake for checking. If the pads almost
reach the bottom, please ask your dealers to change it by:
1. visual check if the pad worn out to the bottom of the
groove or not.
2. measure the pad thickness, if it is less than 2mm.
NOTE: If the brake area is wet(getting water), the brake
will be out of order and dangerous to you.

BRAKE FLUID CHECK

Insufficient brake fluid will make the air into the brake system and may cause the brake out of control.
Please check the brake fluid level all the time and refill it if necessary.
1.When checking the oil level, please turn the handle bar assuring the brake oil on the horizontal
position.
2.Use correct brake oil, otherwise the oil seal will be defected. This will cause the oil leaking & losing
the brake function. Standard brake oil: FMVSS DOT3 or SAE J1703.
3. Refill same kind of brake oil. Mixing with different oils will yield a bad reaction and cause the brake
out of order.
4.To avoid the water getting into the main cylinder, otherwise the boiling temperature of the brake oil
will be declining make the air be obstructed.
43