Scanning Sequence Examples; Errors While Scanning; Imaging Preferences Parameter Defaults - Motorola DS9208 Product Reference Manual

5 - 2 DS9208 Product Reference Guide

Scanning Sequence Examples

In most cases scanning one bar code sets the parameter value. For example, to disable image capture
illumination, scan the Disable Image Capture Illumination bar code under
page 5-5. The digital scanner issues a fast warble beep and the LED turns green, signifying a successful
parameter entry.
Other parameters require scanning several bar codes. See these parameter descriptions for this procedure.

Errors While Scanning

Unless otherwise specified, to correct an error during a scanning sequence, just re-scan the correct parameter.

Imaging Preferences Parameter Defaults

Table 5-1 lists the defaults for imaging preferences parameters. To change the default values, scan the
appropriate bar codes in this guide. These new values replace the standard default values in memory. To recall
the default parameter values, scan the
NOTE See
miscellaneous default parameters.
Imaging Preferences Parameter Defaults
Table 5-1
Imaging Preferences
Operational Modes
Image Capture Illumination
Snapshot Mode Timeout
Snapshot Aiming Pattern
Image Cropping
Crop to Pixel Addresses
Image Size (Number of Pixels)
Image Brightness (Target White)
JPEG Image Options
JPEG Target File Size
JPEG Quality and Size Value
Set Default Parameter on page
Appendix A, Standard Default Parameters
Parameter
4-4.
for all user preferences, hosts, symbologies, and
Parameter
Number
N/A N/A
361 Enable
323 0 (30 seconds)
300 Enable
301 Disable
315 0 top
316 0 left
317 479 bottom
318 751 right
302 Full
390 180
299 Quality
561 160 kB
305 65
Image Capture Illumination on
Page
Default
Number
5-4
5-5
5-6
5-6
5-7
5-8
5-9
5-10
5-10
5-11
5-11