Slide the base of the digital scanner into the bracket, oriented so the scan window faces down.
3.
Inserting the DS9208 into the Wall Mount Bracket
Figure 1-4
Desk Mount Bracket
An optional desk mount bracket is available for mounting the scanner to a desk or other horizontal surface. For
a template that facilitates screw placement, see
To mount the DS9208:
Place the bracket in its desired location, and insert two #8 screws through each screw hole in the bracket.
1.
NOTE Select a screw type and length appropriate for the surface material.
Tighten the screws to secure the bracket to the surface.
2.
Slide the base of the digital scanner forward into the bracket.
3.
Mounting Templates on page
Getting Started
1-9.
1 - 5