Set Lengths For Code 128 - Motorola DS9208 Product Reference Manual

10 - 28 DS9208 Product Reference Guide

Set Lengths for Code 128

Parameter # L1 = 209, L2 = 210
The length of a code refers to the number of characters (i.e., human readable characters), including check
digit(s) the code contains. Set lengths for Code 128 to any length, one or two discrete lengths, or lengths within
a specific range. The default is Any Length.
NOTE When setting lengths, enter a leading zero for single digit numbers.
•
One Discrete Length - Decode only Code 128 symbols containing a selected length. Select the length
using the bar codes in
with 14 characters, scan Code 128 - One Discrete Length, and then scan 1, 4. To correct an error or
change the selection, scan
•
Two Discrete Lengths - Decode only Code 128 symbols containing either of two lengths. Select
lengths using the bar codes in
symbols containing either 2 or 14 characters, select Code 128 - Two Discrete Lengths, and then
scan 0, 2, 1, 4. To correct an error or change the selection, scan
•
Length Within Range - Decode Code 128 symbols with a specific length range. Select lengths
using the bar codes in
containing between 4 and 12 characters, scan Code 128 - Length Within Range, and then scan 0, 4, 1,
2. To correct an error or change the selection, scan
•
Any Length - Decode Code 128 symbols containing any number of characters within the digital
scanner's capability.
Code 128 - One Discrete Length
Code 128 - Length Within Range
Appendix G, Numeric Bar
Cancel on page G-2.
Appendix G, Numeric Bar
Appendix G, Numeric Bar Codes.
Codes. For example, to decode only Code 128 symbols
Codes. For example, to decode only Code 128
Cancel on page
For example, to decode Code 128 symbols
Cancel on page G-2.
Code 128 - Two Discrete Lengths
*Code 128 - Any Length
G-2.