USB Host Parameters
USB Device Type
Select the desired USB device type. After selecting the device type, see
a keyboard type.
NOTE When changing USB Device Types, the digital scanner automatically resets and issues the standard
startup beep sequences.
NOTE Before selecting USB CDC Host, install the CDC INF file on the host to ensure the scanner does not stall
during power up (due to a failure to enumerate USB). If the scanner stalls, to recover it:
1) Install the CDC INF file
2) After power-up, hold the trigger for 10 seconds, which allows the scanner to power up using an
*
HID Keyboard Emulation
IBM Hand-Held USB
or
alternate USB configuration. Upon power-up, scan another USB Device Type.
Appendix B, Country Codes
IBM Table Top USB
IBM OPOS
(IBM Hand-Held USB with Full Scan Disable)
USB Interface
6 - 5
to select