Presentation Aiming Pattern
Parameter # 590
Select Enable Presentation Aiming Pattern to project the aiming pattern during bar code capture in
presentation mode, Disable Presentation Aiming Pattern to turn the aiming pattern off, or Enable
Presentation Aiming Pattern on PDF to project the aiming pattern when the digital scanner detects a 2D bar
code.
This parameter does not apply to Snapshot Mode. See
NOTE With
Picklist Mode on page 4-23
Aiming Pattern is disabled.
Enable Presentation Aiming Pattern
(1)
Enable Presentation Aiming Pattern on PDF
(2)
User Preferences & Miscellaneous Options 4 - 15
Operational Modes on page
enabled, the decode aiming pattern flashes even when the Decode
*Disable Presentation Aiming Pattern
5-4.
(0)