Continuous Bar Code Read; Unique Bar Code Reporting - Motorola DS9208 Product Reference Manual

4 - 24 DS9208 Product Reference Guide

Continuous Bar Code Read

Parameter # 649
Enable this to report every bar code while the trigger is pressed.
NOTE Zebra strongly recommends enabling
accidental decodes when more than one bar code is in the imaging engine's field of view.
*
Disable Continuous Bar Code Read

Unique Bar Code Reporting

Parameter # 723
Enable this to report only unique bar codes while the trigger is pressed. This option only applies when

Continuous Bar Code Read

*
Disable Continuous Bar Code Read Uniqueness
(0)
is enabled.
(0)
Picklist Mode with this feature. Disabling Picklist Mode can cause
Enable Continuous Bar Code Read
Enable Continuous Bar Code Read Uniqueness
(1)
(1)