Multicode Mode - Motorola DS9208 Product Reference Manual

4 - 30 DS9208 Product Reference Guide

Multicode Mode

Parameter # 677
Enable this parameter to allow multiple bar codes to decode upon one trigger event based on the programmed
multicode expression. The digital scanner reports a successful decode and provides user indication only if it
decodes all bar codes indicated by the multicode expression, otherwise the decode fails. Bar codes are
transmitted in the order defined in the multicode expression. Disable this to operate in normal decode mode.
NOTES
When using this mode, always orient the digital scanner at the same distance and angle (perpendicular).
*
Disable Multicode Mode
Enabling Multicode Mode disables
Multicode does not operate in presentation mode.
Do not use Multicode Mode if a trigger is set to Laser Preferred Decoding.
Do not use Multicode Mode if
(0)
Picklist Mode.
Continuous Bar Code Read
Enable Multicode Mode
is enabled.
(1)