Usb Ignore Unknown Characters; Usb Convert Unknown To Code 39 - Motorola DS9208 Product Reference Manual

USB Ignore Unknown Characters

This option applies only to the HID Keyboard Emulation device and IBM device. Unknown characters are
characters the host does not recognize. Select Send Bar Codes With Unknown Characters to send all bar
code data except for unknown characters. The digital scanner issues no error beeps.
Select Do Not Send Bar Codes With Unknown Characters, for IBM devices, to prevent sending bar codes
containing at least one unknown character are to the host, or for HID Keyboard Emulation devices, this sends
the bar code characters up to the unknown character. The digital scanner issues an error beep.
*
Send Bar Codes with Unknown Characters
(Transmit)

USB Convert Unknown to Code 39

This option applies only to the IBM hand-held, IBM tabletop, and OPOS devices. Scan a bar code below to
enable or disable converting unknown bar code type data to Code 39.
*
Disable Convert Unknown to Code 39
Do Not Send Bar Codes with Unknown Characters
(Disable)
Enable Convert Unknown to Code 39
USB Interface 6 - 9