User Manual
2.1 Product Appearance of the HMX 442LP4K (310037)
2.1.1 Front Panel
No.
①
②
③
④
⑤
⑥
1.
Notes: Pictures shown in this manual are for reference only. Specifications are subject to change without notice.
2.1.2 Rear Panel
8/52
1
2
3
4
Name
Firmware
Micro USB - firmware upgrade
Power
Illuminate Green when power on, Red in Standby
Indicator
IR
In-built IR sensor, receive IR signals sent from IR remote.
LCD Screen
Displays real-time status indication.
Normal mode: ranging from "1" to "4".
INPUTS/
Enquiry mode (buttons 1~4): Press "ENTER" for >3
Menu buttons
seconds to enter mode. Press
different menus,
to confirm.
OUTPUTS but-
Normal mode: ranging from "1" to "4". Output 1~2 support
tons/ EDID
synchronous local HDMI output.
Management
EDID Invoking mode: press and hold EDID button for >3
buttons
seconds to enter mode, press buttons 1or 2, these switch to
the previous/next EDID data.
ALL: Select all inputs / outputs
Function Buttons
⑦
EDID management button: Enables input port to manually
capture and select the EDID data of output device.
CLEAR: Cancel an operation, like switching output
Channel or learning EDID data before it comes into effect.
The matrix will return to the previous state.
ENTER: Confirms operation. Press and hold for >3 seconds to
enter Enquiry mode.
5
7
6
Description
to select
to select options, press ENTER