Gui For Tcp/Ip - Triax HMX 442 LP4K User Manual

Follow the steps below:
1. Connect the PC's Ethernet port to the TCP/IP port on the Matrix using a RJ45 standard patch lead
2. Make note of your PC's IP address and default gateway settings
3. Set the PC's IP settings and Default gateway to be in the same range as the matrix
4. Change the IP address and the default gateway setting of the matrix (which is on the label stuck to the unit) to an address
within the same range as the router
5. Port 4001
4.5.2 GUI for TCP/IP control
The Triax series of Matrices come with an on-board GUI for convenient TCP/IP control. The GUI allows
the user to interact with the matrix through graphical icons and visual indicators. To access the web
browser type in the following IP address 192.168.0.178. The screen below will be shown.
There are two logins for each matrix one for the Administrator and the other for User.
Default Username: admin and the password is: admin
Default Username: user and the password is: user
The administrator has more rights and can access and configure settings whilst the User can only view with minimal access to
settings.
43/52