Command
Function
Transfer the AV signal from the input
channel [x1] to one or several output
[x1]V[x2].
channels ([x2], separate output channels
with comma).
Transfer the AV and IR signal from input
channel [x1] to one or several output
[x1]B[x2].
channels ([x2], separate output channels
with comma).
Transfer the IR signal from output [x1] to
[x1] R[x2].
input [x2].
Check the I/O connection status of output
Status[x].
[x]
Inquire the input channel to the output
Status.
channels one by one.
Save the present operation to the preset
Save[Y].
command [Y], ranges from 0 to 9.
Recall[Y].
Recall the preset command [Y].
Clear[Y].
Clear the preset command [Y].
PWON.
Work in normal mode.
Enter into standby mode and cut off the
PWOFF.
power supply to HDBaseT receivers.
Enter into standby mode. (Do not cut off
the power supply to HDBaseT receivers,
STANDBY.
press other buttons or send other com-
mands to start.)
HDCP management command.
[Y] is for input (value: I) or output (value:
O); [X] is the number of the port, if the
/%[Y]/[X]:[Z].
value of X is ALL, it means all ports; [Z] is
for HDCP compliant status, the value
may be 1 (HDCP compliant) or 0 (not
HDCP compliant).
Enable HDMI audio output of port x.
DigitAudioON
X=1, 2, 3, 4, enable this port.
[x].
X=5, enable all the 4 ports.
Feedback Example
AV: X1-> X2
(X1/X2=01~04)
AV: X1-> X2
(X1/X2=01~04)
IR:
X1-> X2(X1、
X2=01~04)
AV: Y-> X
(X=01~04, Y=01~04)
AV: 01-> 01
AV: 02-> 02
AV: 03-> 03
AV: 04-> 04
Save To FY
(Y=0-
9)
Recall From FY (Y=0
-9)
Clear FY
(Y=0-9)
PWON
PWOFF
STANDBY
/%[Y]/[X]:[Z].
DigitAudio ON with
[x]
27/52