Triax HMX 442 LP4K User Manual page 36

User Manual
Command
UpgradeIntED ID
[x].
GetIntEDID[x].
GetInPortEDI D
[X].
%0801.
%0900.
%0901.
%0911.
%9951.
%9952.
%9953.
%9954.
%9955.
%9956.
%9957.
36/52
Function
Upgrade one of the 6 embedded EDID
data, x is the serial number for EDID data
1. 1080P 3D 2CH
2. 1080P 3D Multichannel
3. 1080P 2D 2CH
4. 1080P 2D Multichannel
5. 3840x2160 2D (30Hz)
6. 4096x2160 2D (30Hz)
When the switcher gets the command, it will
show a message to send EDID file (.bin
file). Operations will be invalid after
10 seconds.
Return the embedded EDID data ranked x,
[x]=1~6
Return the EDID data of input [x], [x]=1~8
Auto HDCP management, activate carrier
native mode
Switch to carrier native mode.
Switch to force carrier mode.
Reset to factory default.
Check the command sent by port 1 when
PWON.
Check the command sent by port 2 when
PWON.
Check the command sent by port 3 when
PWON.
Check the command sent by port 4 when
PWON.
Check the command sent by port 5 when
PWON.
Check the command sent by port 6 when
PWON.
Check the command sent by port 7 when
PWON.
Feedback Example
Please send the
EDID file
%0801.
Carrier native
Force carrier
Factory Default
Port 1:data when
PWON
Port 2:data when
PWON
Port 3:data when
PWON
Port 4:data when
PWON
Port 5:data when
PWON
Port 6:data when
PWON
Port 7:data when
PWON