Rs232 Communication Commands - Continued - Triax HMX 442 LP4K User Manual

User Manual
Command
UpgradeIntEDID[x].
GetIntEDID[x].
GetInPortEDID[X].
%0801.
%0900.
%0901.
%0911.
%9951.
%9952.
%9953.
%9954.
%9955.
%9956.
%9957.
%9958.
30/52
Function
Upgrade one of the 5 embedded EDID data, x is
the serial number for EDID data:
1. 1080P 2D 2CH
2. 1080P 3D 2CH
3. 1080P 2D Multichannel
4. 1080P 3D Multichannel
5. 3840x2160 2D (30Hz)
When the switcher gets the command, it will
show a message to send EDID file (.bin file). Oper-
ations will be invalid after 10 seconds.
Return the embedded EDID data ranked x, [x]=1~5
Return the EDID data of input [x], [x]=1~4
Auto HDCP management, activate carrier native
mode
Switch to carrier native mode.
Switch to force carrier mode.
Reset to factory default.
Check the command sent by port 1 when PWON.
Check the command sent by port 2 when PWON.
Check the command sent by port 3 when PWON.
Check the command sent by port 4 when PWON.
Check the command sent by port 1 when PWOFF.
Check the command sent by port 2 when PWOFF.
Check the command sent by port 3 when PWOFF.
Check the command sent by port 4 when PWOFF.
Feedback Example
Please send the EDID file
%0801
Carrier native
Force carrier
Factory Default
Port 1:data when PWON
Port 2:data when PWON
Port 3:data when PWON
Port 4:data when PWON
Port 1:data when PWOFF
Port 2:data when PWOFF
Port 3:data when PWOFF
Port 4:data when PWOFF