Rs232 Communication Commands - Continued - Triax HMX 442 LP4K User Manual

Command Function
Input port [y] learns the EDID from out-
put port [x].
If the EDID data is available and the au-
EDIDH[x]B[y].
dio part supports not only PCM mode,
then force-set it to support PCM mode
only. If the EDID data is not available,
then set it as initialized EDID data.
Set the audio part of input port [x] to
EDIDPCM[x].
PCM format in EDID database.
Get EDID data from output [x] and dis-
EDIDG[x].
play the output port number.
Restore the factory default EDID data of
EDIDMInit.
every input.
Manually EDID switching. Enable input
[Y] to learn the EDID data of output[X].
EDIDM[X]B[Y].
If the EDID data is not available, then set
it as initialized EDID data.
Upgrade EDID data via the RS232 port.
[x] is the input port, when the value of X
is 9, it means to upgrade all input ports.
When the switcher receives the com-
EDIDUpgrade
mand, it will show a message to prompt
[x].
you to send EDID file (.bin file). Opera-
tions will be canceled after 10 seconds.
Please cut off all connections of
HDBaseT ports.
Set the EDID data of input port [x] to
built-in EDID No.[y].
EDID/[x]/[y].
[y]=1~5, correspond to the 5 embedded
EDID data separately
Feedback Example
EDIDH[x]B[y]
EDIDPCM[x]
Hexadecimal EDID
data and carriage
return character
EDIDMInit.
EDIDM[X]B[Y]
Please send the
EDID file
EDID/[x]/[y]
29/52