Enquiry; Clear Operation; Ir Control - Triax HMX 442 LP4K User Manual

User Manual

4.1.4 Enquiry

Press and Hold the "ENTER" button for 3 seconds and this will give you access to the "ENQUIRY"
Mode. Use Left and Right direction buttons to navigate the menu.
Function Items
Check the connection
status of inputs
Check the connection sta-
tus of outputs
Correspondence between
inputs and outputs
Check if the input is
with HDCP
Check if the output is
with HDCP
Press and Hold the "ENTER" button for 3 seconds and this will give you access to the "ENQUIRY"
Mode. Use Left and Right direction buttons to navigate the menu.
Check Output
Resolution
To Check the Output Status
Press any output button to check its corresponding input.
Example: Check which one is the corresponding input is assigned to output 2. (Presume Output 2 corresponds to Input 1.)
Operation: Press Output 2 button, The LCD screen displays "AV: 1->2 IR: 1->2" and indicators input 1 and
2 are corresponding the display will last for 3 seconds. Also the corresponding BLUE LED's above the buttons will
illuminate.

4.1.5 Clear operation

When you switch output channel, learn EDID data or set EDID data, press Clear button to go "back" to the previous step
before pressing "ENTER" you confirm and access that mode or confirm changes.

4.2 IR Control

By using IR & HDBaseT transmission technology, all Matrices have the functions as follows:
1) A b l e t o control the device or display in the Zone. From the matrices location (Local).
2) Control local input/output device remotely.
3) Control the Matrix locally/remotely.
20/52
Example
IN 1 2 3 4
Connect Y Y Y Y
OUT 1 2 3 4
Connect Y Y N N
OUT 1 2 3 4
INPUT 1 2 3 4
IN 1 2 3 4
HDCP Y Y Y N
OUT 1 2 3 4
HDCP Y Y Y N
RESOLUTION
OUT 1 1920 x 1080
Description
Y means the corresponding port is
connected with input device, N means
not.
Y means the corresponding port is con-
nected with output device, N means not.
Shows the correspondence
between the 8 inputs and 8 outputs.
Y means the input signal is with
HDCP, N means not.
Y means the output signal is with
HDCP, N means not.
Use button to check ALL output
resolutions separately.
output