Tcp/Ip Control; Control Modes - Triax HMX 442 LP4K User Manual

User Manual

4.5 TCP/IP Control

4.5.1 Control Modes

Control of the Triax Matrix via TCP/IP from remote zones
TCP/IP default settings: IP is 192.168.0.178, Gateway is 192.168.0.1, and Serial Port is 8080. IP & Gateway can be changed as
you need, Serial Port cannot be changed.

Control the matrix from a single PC

Connect the PC to the RJ 45 HDBaseT port on the matrix, set the IP address and gateway to the same IP and gateway
as the matrix (Default:192.168.0.178)
Control the Matrix by PC (s) on a Network (LAN)
Connect the Matrix and the PC to the router via a direct network connection as shown in the example
below. Set the IP and Default gateway of the matrix to the same as the router's. If the settings are correct
the Matrix and the PC are on the same network they will be able to communicate with each other.
42/52