User Manual
2.3 Product Appearance of the HMX 884LP4K (310038)
2.3.1 Front Panel
No.
Firmware
①
Power
②
Indicator
IR
③
④
LCD Screen
INPUTS/ Menu
⑤
buttons
OUTPUTS buttons/
EDID Management
⑥
buttons
Function Buttons
⑦
12/52
1
2
3
4
Name
Micro USB firmware update
Illuminate Green when power on
Illuminate Red in standby mode
In-built IR sensor, receive IR signals sent from IR remote.
Display real-time operation status.
Normal mode: ranging from "1" to "8".
Enquiry mode (buttons 1~4): Press "ENTER" for >3 seconds to enter
mode. Press
ENTER to confirm.
Normal mode: ranging from "1" to "8". Output 1~3 support
Synchronous local HDMI output.
EDID control mode: press and hold EDID button for >3 seconds enter this
mode, buttons 1~8 correspond to the 8 embedded EDID data received
from the displays. Press any of the 8 buttons to save the embedded EDID
data.
ALL: Select all inputs / outputs
EDID management button: Enables input port to manually capture and
select the EDID data of output device.
CLEAR: Cancel an operation, like switching output
Channel or learning EDID data before it comes into effect. The matrix
will return to the previous state.
ENTER: Confirms operation. Press and hold for >3 seconds to enter Enquiry
mode.
5
6
Description
to select different menus,
7
to select options. Press