LifeGear 63140 G5/HOME GYM Owner's Manual page 32

45
40
59
40
45
Tool:
1
2 Wrenches (19-17)
Step 10
Attach the Pulley (27) onto the Leg Extension Tube (11) with one M10x65 Hexagon Head
Bolt (24), one M10 Nylon Lock Nut (58), two Flange Covers (32), and two Ø10 Washers (35).
Tighten bolt and nut with two Wrenches provided.
Connect the Hook (40) to the ball stopper end of the Leg Extension Cable (45) and Coil
Chain (59).
Connect the Hook (40) to the Coil Chain (59) and Arm Curl Handle (13).
Hardware:
1Pulley 2 Flange Covers 4 Hooks 2 Coil Chains
1 Hexagon Head Bolt M10x65 2 Washers (Ø10)
1 Nylon Lock Nut (M10)
Routing the Leg Extension Cable
Insert the cable to the Pulley (27) on the Leg Extension Tube (11) then pull it towards to the
second Pulley (27) on the Main Support Tube (4). Pull it upwards to the Pulley (27) on the
Crossed Double Floating Pulley Bracket (36). Draw the Leg Extension Cable (45) around
the Pulley (27) then pull it downwards to the Pulley (27) on the Main Base Tube (1). Pull it
upwards to the Pulley (27) on the Double Floating Pulley Bracket (37). Draw the Leg
Extension Cable (45) around the Pulley (27) on the Double Floating Pulley Bracket (37) then
pull it downwards to the triangle plate on the Main Base Tube (1).
Connect the Leg Extension Cable (45) to the Hook (40) then connect the Hook (40) with Leg
Extension Cable (45) to the Coil Chain (59). Connect the other end of the Coil Chain (59) to
the Hook (40) then connect the Hook (40) with the Coil Chain (59) to the hole on the triangle
plate of the Main Base Tube (1).
PLEASE REFER TO THE "CABLE LOOP DIAGRAM" SECTION ON PAGE
21.
31