LifeGear 63140 G5/HOME GYM Owner's Manual page 25

34
35
35
57
7
Step 3
Attach one end of the Butterfly Arm Cable (57) onto the Left Butterfly Arm (6) with one
M10x25 Hexagon Head Bolt (34), one M10 Nylon Lock Nut (58), and two Ø10 Washers (35).
Tighten bolt and nut with two Wrenches provided.
Hardware:
2 Hexagon Head Bolts (M10x25)
Routing the Butterfly Arm Cable
Insert the other end of the cable around the Pulley (27) on the left Pulley Bracket (14) then
pull it downwards to the Crossed Double Floating Pulley Bracket (36). Draw the Butterfly
Arm Cable (57) around the Pulley (27) on the Crossed Double Floating Pulley Bracket (36)
then pull it upwards to the right Pulley Bracket (14). Draw the Butterfly Arm Cable (57)
around the Pulley (27) on the right Pulley Bracket (14) then pull it forwards to the Right
Butterfly Arm (7).
Attach the other end of the Butterfly Arm Cable (57) onto the Right Butterfly Arm (7) with one
M10x25 Hexagon Head Bolt (34), one M10 Nylon Lock Nut (58), and two Ø10 Washers (35).
Tighten bolt and nut with two Wrenches provided.
PLEASE REFER TO THE "CABLE LOOP DIAGRAM" SECTION ON PAGE
21.
58
27
26
58
6
26
27
35
57
35
34
4 Washers (Ø10)
24
57
Tool:
2 Wrenches (19-17)
2 Nylon Lock Nuts (M10)