Control Panel - Southbend P36N-TTT Owner's Manual

O
PERATION

Control Panel

Power Switch
Switch ON to use the oven, switch
OFF when done using the oven.
Cook Temperature Control
Turn knob to select desired cooking
temperature (LOW, MEDIUM, or
HIGH). The heat-on indicator will go
out when the oven reaches the set
temperature, and will cycle on and
off as the burners operate to
maintain the set cooking
temperature.
P 18
AGE
ON OFF
POWER
COOK COOL
FAN MODE
MEDIUM
LOW HIGH
COOK TEMPERATURE
TOP SURFACE IGNITION
LIGHTING INSTRUCTIONS
1. TURN ALL GRIDDLE TOP
CONTROLS TO THE "OFF"
POSITION.
2. PRESS AND HOLD THE TOP
RED PILOT BUTTON WHILE
PRESSING THE "TOP SURFACE
IGNITION" SWITCH ONTHE
LOWER CONTROL PANEL.
3. VERIFY THE PILOT IS LIT BY
VIEWING THROUGH THE TOP
PANEL HOLE.
4. HOLD DOWN THE RED BUTTON
FOR 45 SECONDS OR UNTIL
THE PILOT REMAINS LIT.
5. TURN GRIDDLE TOP CONTROLS
TO DESIRED SETTINGS.
REF. LABEL (1195341) FOR FULL
LIGHTING INSTRUCTIONS.
O
WNER
W ' G
ENDY S AS
Fan Mode
In COOK mode, the fan runs
continuously except when the doors
are open. The fan does NOT cycle
with the operation of the burners. In
COOL mode, the fan runs
continuously even if the doors are
open. Since the burners will not
operate if the oven doors are open,
to rapidly cool the oven after
cooking is completed, open the
doors and switch the fan mode to
COOL.
Heat-On Indicator
Indicator is lit when the burners are
operating. It goes out when the
selected temperature is reached.
Top Surface Ignition
Use this switch to ignite the burners
of the range-top griddle. Follow the
LIGHTING INSTRUCTIONS shown
below the switch.
' M 1195747
S ANUAL
R
ANGE