Southbend P32N-BBB Installation And Operation Manual
  1. Manuals
  2. Brands
  3. Southbend Manuals
  4. Ranges
  5. P32N-BBB
  6. Installation and operation manual

Southbend P32N-BBB Installation And Operation Manual

Platinum series sectional range
Hide thumbs Also See for P32N-BBB:
Table of Contents

Advertisement

Quick Links

Download this manual
Installation & Operation Manual
Platinum Series Sectional Range
Improper installation, adjustment, alteration, service, or maintenance can cause property damage, injury, or death.
Read installation, operation, and maintenance instructions thoroughly before installing or servicing this equipment.
1100 Old Honeycutt Road, Fuquay-Varina, NC 27526 USA • www.southbendnc.com
M
1185836 R
5 (10/08)
ANUAL
EV
$21.00
Charbroiler Models
Flush Open Burner Models
Graduated Hot-Top Models
Uniform Hot-Top Models
Standard Griddle Models
Step-Up Open-Burner Models
Thermostatic Griddle Models
Combination Open-Burner Hot-Top Models
Combination Open-Burner Griddle Models
Wood Smoker
WARNING
IMPORTANT FOR FUTURE REFERENCE
Please complete this information and retain
this manual for the life of the equipment:
Model #: __________________________
Serial #: __________________________
Date Purchased: ___________________
P
S
S
LATINUM
ERIES
ECTIONAL
M
S
ANUAL
ECTION
R
ANGE
SR

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the P32N-BBB and is the answer not in the manual?

Questions and answers

Related Manuals for Southbend P32N-BBB

Summary of Contents for Southbend P32N-BBB

  • Page 1 Installation & Operation Manual Platinum Series Sectional Range Improper installation, adjustment, alteration, service, or maintenance can cause property damage, injury, or death. Read installation, operation, and maintenance instructions thoroughly before installing or servicing this equipment. 1100 Old Honeycutt Road, Fuquay-Varina, NC 27526 USA • www.southbendnc.com...

  • Page 2: Safety Precautions

    Warranty will be void if service work is performed by other than a qualified technician, or if other than genuine Southbend replacement parts are installed. Give this Owner’s Manual and important papers to the proper authority to retain for future reference. Copyright © 2008 by Southbend. All rights reserved. Published in the United States of America. WARNING FIRE HAZARD...

  • Page 3: Retain This Manual For Future Reference

    Congratulations! You have purchased one of the finest pieces of heavy-duty commercial cooking equipment on the market. You will find that your new equipment, like all Southbend equipment, has been designed and manufactured to meet the toughest standards in the industry. Each piece of Southbend equipment is carefully engineered and designs are verified through laboratory tests and field installations.

  • Page 4: Specifications

    Therefore, installations should comply with all local codes. Southbend reserves the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, additions, or replacements for previously purchased equipment.
  • Page 5 (see Figure 1 on page 3). Connect the sectional range ONLY to the type of gas for which it is configured and adjusted.
  • Page 6 PECIFICATIONS Figure 2 Dimensions Front Gas Manifold 33-3/4" (859) 12-1/2" (318) SIDE VIEW of Flush-Burner 16"-Wide Cabinet-Base Models 24" (610) 9-1/4" (235) 12" (305) 36" Flue Riser 24" Flue Riser 5" Flue Riser 60" (1524) 41" 36" (1041) (914) Optional Rear Gas Connection 6"...
  • Page 7 LATINUM ERIES ECTIONAL ANGE Figure 3 Dimensions (continued) 43-1/2" (1105) 40" (1016) 37-1/2" (953) 34" (864) 4-1/2" (114) Front Gas Manifold 33-3/4" (859) Motor for 15-3/4" Convection (400) Oven Model SIDE VIEW of Charbroiler/Griddle Oven-Base Models 24" 40-1/2" (610) (1029) 9-1/4"...
  • Page 8 PECIFICATIONS TILITY EQUIREMENTS AND Model Width Base Type P12C-B 12" cabinet P12N-B 12" modular P16C-C 16" cabinet P16C-G 16" cabinet P16C-H 16" cabinet P16C-T 16" cabinet P16C-X 16" cabinet P16N-C 16" modular P16N-G 16" modular P16N-H 16" modular P16N-T 16" modular P16N-X 16"...
  • Page 9 LATINUM ERIES ECTIONAL ANGE Model Width Base Type P32D-XT 32" standard oven P32D-XX 32" standard oven P32N-BBB 32" modular P32N-BBB-SU 32" modular P32N-CC 32" modular P32N-GG 32" modular P32N-GRAD 32" modular P32N-HH 32" modular P32N-TT 32" modular P32N-XG 32" modular P32N-XH 32"...
  • Page 10 The appliance, when installed, must be electrically grounded in accordance with local codes, or in the absence of local codes, with the National Electrical Code, ANSI/NFPA 70, or the Canadian Electrical Code, CSA C22.2, as applicable. An electrical diagram is located on the rear of the range, near the motor. Top Type...

  • Page 11: Operation

    3. Light the standing pilots of each connected appliance. 4. Light the ovens of the sectional range first, then wait six minutes before turning on the top sections. This enables all air to be purged from the sectional-range gas piping.
  • Page 12 1. Check that the burner control knob is in the OFF position. 2. Check that the pilot is in the correct position beside the burner. 3. Turn on the gas supply to the sectional range (if not already on). 4. Light the pilot with a match or a pilot-lighting device. The pilot flame should be blue and steady.
  • Page 13 Operation of Uniform Hot-Top Section Each 16"-wide section has one control knob, which can be turned to OFF or to any position in the range from LOW to HIGH. When the control is set to HIGH, the hot top surface will heat to about 700°F (370°C).
  • Page 14 Operation of Graduated Hot-Top Section Each 32"-wide section has one control knob, which can be turned to OFF or to any position in the range from LOW to HIGH. When the control is set to HIGH, the round center section will heat to about 725°F (385°C), the ring-shaped section will heat to about 625°F (330°C), and the outer areas...
  • Page 15 3. Check that each pilot is in the correct position. 4. Turn on the gas supply to the sectional range (if not already on). 5. Light the pilots with a match or a pilot-lighting device. The pilot flames should be blue and steady.
  • Page 16 Figure 8 Operation of Wood Smoker Section Wood Type(s): Split or Chunk Wood. Wood Chunks: Hickory Chunks, 10 lb bag, Southbend P/N 1188495 Mesquite Chunks, 10 lb bag Southbend P/N 1188496 Split Wood: 4” diameter X 20” long or smaller Operation: a.) Fill WATER/CATCH tray with water to bottom of wood...
  • Page 17 1. Check that all the control knobs are in the OFF position. 2. Turn on the gas supply to the sectional range (if not already on). 3. Light the pilot by inserting a long match (at least 11" long) or pilot-lighting device straight into the hole on the front valve panel of the griddle.
  • Page 18 Operation of Thermostatic Griddle Sections Each 16"-wide section has one control knob that can be turned to OFF, or to any temperature in the range 150°F to 400°F (66°C to 204°C). To start cooking, turn on the appropriate control knob. Check that the burner ignites.
  • Page 19 Operation of Oven Each oven has a thermostatic control that can be set in the range 175°F to 550°F (66°C to 260°C). Convection ovens have a fan that can be set to HI speed or LO speed. For advice on using a convection oven, see the information on the following two pages of this manual.
  • Page 20 PERATION UGGESTIONS FOR OOKING As a guide, set oven temperatures 25 to 50 degrees lower than called for in recipes using conventional (non- convection) ovens. FROZEN ENTREE PRODUCTS: Punch holes in lid before heating. Tent lid if product has a tendency to stick, i.e., lasagna or macaroni and cheese.
  • Page 21 LATINUM ERIES ECTIONAL ANGE ORRECTING ROBLEMS WHEN If… Cakes are dark on the sides and not done in the center… Cake edges are too brown… Cakes have light outer color… Cake settles slightly in the center… Pies have uneven color… Meats are browned, but not done in center…...

  • Page 22: Daily Cleaning And Maintenance

    Southbend appliances are sturdily constructed of the best materials and are designed to provide durable service when treated with ordinary care. To expect the best performance, your equipment must be maintained in good condition and cleaned daily.
  • Page 23 The hot-top plates can be removed and cleaned with hot water and detergent. A wire brush may be used on the underside of the hot top plate. It is recommended not to clean tops while still on the range, even if cooled, as excess water will drip into the burner box and deteriorate the metal.

  • Page 24: Installation

    Do not remove any tags or labels attached to the range until the range is installed and working properly.

  • Page 25: Installation Of Legs

    6. Raise the range sufficiently to allow the legs to be attached. For safety, “shore up” and support the range with an adequate blocking arrangement strong enough to support the load.
  • Page 26 Casters are provided with a Zerk fitting for proper lubrication when required. 1. Raise unit sufficiently to allow the casters to be attached. For safety, “shore up” and support the range with an adequate blocking arrangement strong enough to support the load.
  • Page 27 The range can be mounted on an optional caster frame. The frame will have a threaded leg pad at each corner. Each caster has a corresponding mating thread. The casters can be adjusted to overcome a slightly uneven floor. Casters are provided with a Zerk fitting for proper lubrication when required.
  • Page 28 ONNECT ATTERY If the range is part of a battery, and the battery was shipped partially disassembled, connect the battery sections using the following procedure. 1. Remove valve panels from all sections. Mark them so that they can be returned to their respective section.
  • Page 29 2. Slide each flue riser down onto the brackets projecting from the back of the corresponding section(s) of the sectional range. Secure the flue riser to the brackets with the four provided 1/4-20x3/4 hex-head bolts, flat washers, and lockwashers. Also, secure the bottom edge of the flue riser to the top rear edge of the sectional range using the provided #10 sheet metal screws.

  • Page 30: Step 6: Connect Electricity

    (see Figure 1 on page 3). Connect the sectional range ONLY to the type of gas for which it is configured and adjusted.

  • Page 31: Step 8: Connect Water Supply

    4. Locate the pressure regulator(s) packed with the sectional range. Install the pressure regulator, taking care that the direction of gas flow corresponds to the arrow on the side of the pressure regulator.
  • Page 32 1. Wipe clean all surfaces. 2. Unless the sectional range is to be placed in service immediately, shut off the gas, electricity, and water supplies. 3. Make sure that a copy of this manual will be available to the people who will operate and maintain the sectional range.
  • Page 33 On models with a cabinet base, the serial plate is located inside the left cabinet door. On modular (countertop) models, the serial plate is located inside the front valve panel. Replacement parts (including parts not listed in this manual) may be ordered either through a Southbend Authorized Parts Distributor or a Southbend Authorized Service Agency.

  • Page 34: Troubleshootingb

    ILOTS Look for - – Main gas supply to unit is OFF. – Incorrect gas type is being supplied to the range. – Incorrect gas supply pressure. – Incorrect orifices. – Primary air not adjusted properly.
  • Page 35 LATINUM ERIES ECTIONAL ANGE Pilot-flame outage is often due to an unstable flame caused by over-adjustment to the point where the pilot flame is leaving its port, or “blowing off.” Sometimes the pilots are increased too much in an effort to improve ignition, resulting in this unstable condition.
  • Page 36 ERVICE Figure 18 Adjustment of Graduated Hot-Top Pilot and Burner The burner valves are not adjustable. The burner orifice is of the fixed type, sized for the type of gas and the operating altitude. To adjust the burner air-gas mixture, loosen the screw that secures the air shutter on the mixer face and rotate the mixer cap to obtain a clear, stable blue flame with a distinct inner cone at each port.
  • Page 37 LATINUM ERIES ECTIONAL ANGE ERVICE Figure 19 Adjustment of 33K and 45K Open-Top Burners and Pilots The burner valves are not adjustable. The burner orifice is of the fixed type, sized for the type of gas and the operating altitude. To adjust the burner air-gas mixture, loosen the screw that secures the air shutter on the mixer face and rotate the mixer cap to obtain a clear, stable blue flame with a distinct inner cone at each port.
  • Page 38 ERVICE Figure 20 Adjustment of Thermostatic-Griddle Thermostat Each 16"-wide section of a thermostatic griddle has a control knob that operates a snap-action thermostatic valve. Each valve is adjusted at the factory. If the griddle surface temperature is different from the thermostat dial setting, adjust the thermostatic valve using the following procedure: 1.
  • Page 39 LATINUM ERIES ECTIONAL ANGE Figure 21 Adjustment of Thermostatic-Griddle Burners and Pilot The thermostatic burner valve is adjustable (see page 38). The burner orifice is of the fixed type, sized for the type of gas and the operating altitude. To adjust the burner air-gas mixture, loosen the screw that secures the air shutter on the mixer face and rotate the mixer cap to obtain a clear, stable blue flame with a distinct inner cone at each port.

  • Page 40: Troubleshooting

    ERVICE ROUBLESHOOTING Proper and efficient operation of oven is dependent on correct installation and function of components. Always verify that components are in place and functioning as intended. The following table lists the possible causes of oven-related problems that may occur. Problem Oven will not come on.
  • Page 41 BREAKER. Check all wiring for loose connections or breaks. Go to the junction box on the back of the range and remove the cover. Place a DVM or ammeter on the black wire #1. CAUTION! Be sure a DVM is protected to 40 amps or greater.
  • Page 42 ERVICE Figure 22 Adjustment of Oven Thermostat The oven thermostat is carefully calibrated at the factory so that the dial setting matches the actual oven temperature. Field recalibration is seldom necessary, and should not be resorted to unless considerable cooking experience definitely proves that the control is not maintaining the temperatures to which the dial is set.
  • Page 43 LATINUM ERIES ECTIONAL ANGE ERVICE Figure 23 Adjustment of Oven Pilot and Burner The burner orifice is of the fixed type, sized for the type of gas and the operating altitude. To adjust the burner air-gas mixture, loosen the screw that secures the air shutter on the mixer face and rotate the mixer cap to obtain a clear, stable blue flame with a distinct inner cone at each port.
  • Page 44 DJUSTMENT OF ANIFOLD There is not an internal pressure regulator. The external pressure regulators supplied by Southbend are factory set at 6" W.C. for natural gas and 10" W.C. for propane gas. To check the manifold pressure, do the following: 1.
  • Page 45 LATINUM ERIES ECTIONAL ANGE ERVICE Figure 24 Wiring Diagram for 120 Volt Oven Bases with Electronic Ignition 1185836 R 5 (10/08) NSTALL AND PERATIONS ANUAL...
  • Page 46 ERVICE LATINUM ERIES ECTIONAL ANGE Figure 25 Wiring Diagram for Oven Bases with Standing Pilot & O 1185836 R 5 (10/08) NSTALL PERATIONS ANUAL...

  • Page 47: Table Of Contents

    LATINUM ERIES ECTIONAL ANGE ARTS The following tables and figures list serviceable parts. For parts not listed, contact a Southbend Authorized Parts Distributor or a Southbend Authorized Service Agency. Index of Parts Diagrams Page Number Description 33K-Open-Burner External and Structural Parts...

  • Page 48: Open-Burner External And Structural Parts

    ERVICE 33K-Open-Burner External and Structural Parts See drawing on following page. Quantity* Part Number 12" 32" 36" 48" 1183978 1183970 1187061 1185401 1185486 1189600 1184729 1184730 1185830 1185916 1185915 1184550 1184760 1184759 1185562 1184578 1183883 1185847 1183601 1180872 1183888 1183560 1183531 1183900 1183588...
  • Page 49 LATINUM ERIES ECTIONAL ANGE Figure 26 33K-Open-Burner External and Structural Parts See parts list on previous page. Flush 33K-Open-Burner Models NSTALL AND PERATIONS 32"-Wide Models Shown 1185836 R 5 (10/08) ANUAL Step-Up 33K-Open- Burner Models ERVICE...

  • Page 50: Open-Burner Gas Train Parts

    VALVE, HI-OFF, NAT/LP EXTENSION, ORIFICE ORIFICE, NAT GAS (if appliance will operate above 2000 ft, contact Southbend for appropriate orifice size) ORIFICE, PROPANE (if appliance will operate above 2000 ft, contact Southbend for appropriate orifice size) BURNER ASSEMBLY, OPEN TOP FITTING, 1/2"...
  • Page 51 LATINUM ERIES ECTIONAL ANGE Figure 27 33K-Open-Burner Gas Train Parts See parts list on previous page. Flush 33K-Open-Burner Models 32"-Wide Models Shown NSTALL AND PERATIONS 1185836 R 5 (10/08) ANUAL ERVICE Step-Up 33K-Open-Burner Models...

  • Page 52: Open-Burner Parts

    NIPPLE, EXTENSION 1178202 VALVE, HI-OFF, NAT/LP 1008735 ORIFICE, NAT GAS (if appliance will operate above 2000 ft, contact Southbend for appropriate orifice size) 1008750 ORIFICE, PROPANE (if appliance will operate above 2000 ft, contact Southbend for appropriate orifice size) 1165742...
  • Page 53 LATINUM ERIES ECTIONAL ANGE ERVICE Figure 28 45K-Open-Burner Parts See parts list on previous page. 1185836 R 5 (10/08) NSTALL AND PERATIONS ANUAL...
  • Page 54 ERVICE Charbroiler External and Structural Parts for 16" and 32" Models See drawing on following page. Quantity* Part Number Description 16" 32" 1189600 KNOB 1185945 VALVE PANEL, 16C-C, SS 1185767 VALVE PANEL, 16N-C, SS 1185691 VALVE PANEL, 32A/D-CC, SS 1185692 VALVE PANEL, 32C-CC, SS 1185693 VALVE PANEL, 32N-CC, SS...
  • Page 55 LATINUM ERIES ECTIONAL ANGE Figure 29 Charbroiler External and Structural Parts for 16" and 32" Models See parts list on previous page. NSTALL AND PERATIONS 1185836 R 5 (10/08) ANUAL ERVICE...
  • Page 56 ERVICE Charbroiler External and Structural Parts for 24", 36", and 48" Models See drawing on following page. Quantity* Part Number Description 24" 36" 48" 1189600 KNOB 1184519 VALVE PANEL, 24C-CC, SS 1184521 VALVE PANEL, 24N-CC, SS 1183641 VALVE PANEL, 36A/D-CCC, SS 1183643 VALVE PANEL, 36C-CCC, SS 1183642...
  • Page 57 LATINUM ERIES ECTIONAL ANGE ERVICE Figure 30 Charbroiler External and Structural Parts for 24", 36", and 48" Models See parts list on previous page. 1185836 R 5 (10/08) NSTALL AND PERATIONS ANUAL...
  • Page 58 ERVICE Wood Smoker External and Structural Parts for 36", 48", 60" and 72" Models See drawing on following page. Part Number Description 1188417 Base Assy, 36” Cntrtop Smoker 1188416 Base Assy, 24” Cntrtop Smoker 1188418 Base Assy, 60”, 72” Cntrtop Smoker L. Side 1188419 Base Assy, 72”...
  • Page 59 LATINUM ERIES ECTIONAL ANGE ERVICE Figure 31 Wood Smoker External and Structural Parts for 36", 48", 60" and 72" Models See parts list on previous page. 1185836 R 5 (10/08) NSTALL AND PERATIONS ANUAL...

  • Page 60: Charbroiler And Standard-Griddle Gas Train Parts

    MANIFOLD, DUAL BURNER ORIFICE MANIFOLD, DUAL BURNER ORIFICE ORIFICE, NAT GAS (if appliance will operate above 2000 ft, contact Southbend for appropriate orifice size) ORIFICE, PROPANE (if appliance will operate above 2000 ft, contact Southbend for appropriate orifice size) BURNER ASSEMBLY, CHARBROILER FITTING, DOUBLE PILOT, 3/16"...

  • Page 61: Gas Connection Parts

    LATINUM ERIES ECTIONAL ANGE Figure 33 Gas Connection Parts Part Number Description 1147005 1" PIPE CAP 1146905 1" 90 DEGREE ELBOW 1163489 REAR GAS STUB 1184777 STRAP, 1-1/4" PIPE 1146808 1" PIPE NIPPLE 1174747 TAIL PIPE 1185827 TAIL PIPE FOR BBB MODELS 1146911 ELBOW, ST., BLK, 1"...

  • Page 62: Griddle External And Structural Parts

    ERVICE Griddle External and Structural Parts See drawing on following page. Quantity* Part Number 16" 32" 36" 48" 1073497 1189600 1182156 1185952 1185953 1185954 1185955 1185918 1185664 1185920 1185665 1185919 1185666 1184601 1183963 1184602 1183962 1184600 1183961 1184680 1184674 1184682 1184676 1184684 1184678...
  • Page 63 LATINUM ERIES ECTIONAL ANGE Figure 34 Griddle External and Structural Parts See parts list on previous page. NSTALL AND PERATIONS 1185836 R 5 (10/08) ANUAL ERVICE...

  • Page 64: Thermostatic Griddle Gas Train Parts

    MANIFOLD, DUAL BURNER ORIFICE MANIFOLD, DUAL BURNER ORIFICE ORIFICE, NAT GAS (if appliance will operate above 2000 ft, contact Southbend for appropriate orifice size) ORIFICE, PROPANE (if appliance will operate above 2000 ft, contact Southbend for appropriate orifice size) BURNER ASSEMBLY, CHARBROILER...
  • Page 65 LATINUM ERIES ECTIONAL ANGE Figure 35 Thermostatic Griddle Gas Train Parts See parts list on previous page. NSTALL AND PERATIONS 1185836 R 5 (10/08) ANUAL ERVICE...

  • Page 66: Uniform Hot-Top Parts

    1183680 MANIFOLD, 36” DUAL BURNER ORIFICE 1008750 ORIFICE, NAT GAS (if appliance will operate above 2000 ft, contact Southbend for appropriate orifice size) 1008756 ORIFICE, PROPANE (if appliance will operate above 2000 ft, contact Southbend for appropriate orifice size) 1182762...
  • Page 67 LATINUM ERIES ECTIONAL ANGE Figure 36 Uniform Hot-Top Parts See parts list on previous page. NSTALL AND PERATIONS 1185836 R 5 (10/08) ANUAL ERVICE...

  • Page 68: Graduated-Hot-Top Parts

    MANIFOLD W/A, GRADUATED H/TOP 1176016 BURNER VALVE, NAT 1006425 ORIFICE, NAT GAS (if appliance will operate above 2000 ft, contact Southbend for appropriate orifice size) 1006443 ORIFICE, PROPANE (if appliance will operate above 2000 ft, contact Southbend for appropriate orifice size) 1884...
  • Page 69 LATINUM ERIES ECTIONAL ANGE ERVICE Figure 37 Graduated-Hot-Top Parts See parts list on previous page. 1185836 R 5 (10/08) NSTALL AND PERATIONS ANUAL...

  • Page 70: Oven Base Parts

    SOLENOID TO ORIFICE TUBE (for units with electronic ignition) 1183568 BRACKET, ORIFICE 1008730 ORIFICE, NAT GAS (if appliance will operate above 2000 ft, contact Southbend for appropriate orifice size) 1008748 ORIFICE, PROPANE (if appliance will operate above 2000 ft, contact Southbend for appropriate orifice size) 1187994...
  • Page 71 LATINUM ERIES ECTIONAL ANGE Figure 38 Oven Base Parts See parts list on previous page. Standing Pilot Parts Electronic Ignition Parts Roller Assembly Parts NSTALL AND PERATIONS Standing-Pilot Burner Parts 1185836 R 5 (10/08) ANUAL Electronic-Ignition Burner Parts ERVICE...

  • Page 72: Convection Oven Blower Parts

    ERVICE Figure 39 Convection Oven Blower Parts Part Number Description 1180834 OVEN BAFFLE CO 1177581 BLOWER WHEEL ASSEMBLY 1188523 MOTOR, 1/2 HP, 115 VOLT 1180821 POCKET W/A, BLOWER, 500 SERIES 1181747 SHIELD, RT BLOWER, 500 SERIES 1181748 SHIELD, LT BLOWER, 500 SERIES &...

  • Page 73: Modular-Countertop Base Parts

    LATINUM ERIES ECTIONAL ANGE Figure 40 Modular-Countertop Base Parts Part Number Description 1183863 BASE. 12 COUNTERTOP 1183862 BASE. 16 COUNTERTOP 1183859 BASE. 24 COUNTERTOP 1183576 BASE. 32 COUNTERTOP 1183523 BASE. 36 COUNTERTOP 1185418 BASE. 48 COUNTERTOP 1183861 STIFFENER, 12 BASE 1183860 STIFFENER, 16 BASE 1183858...

  • Page 74: Cabinet-Base Parts

    ERVICE Cabinet-Base Parts See drawing on following page. Quantity* Part Number 12" 16" 24" 32" 1184954 1185496 1184952 1183595 1183598 1184955 1185497 1184953 1183596 1183599 1183875 1183874 1183873 1183600 1183563 1183866 1183865 1183864 1183586 1183869 1183868 1183867 1183587 1183872 1183871 1183870 1183594 1183983...
  • Page 75 LATINUM ERIES ECTIONAL ANGE ERVICE Figure 41 Cabinet-Base Parts See parts list on previous page. 1185836 R 5 (10/08) NSTALL AND PERATIONS ANUAL...

  • Page 76: Flue Riser Parts

    ERVICE Flue Riser Parts See drawing on following page. For continuous flue risers spanning multiple sections, or sloped enclosures, contact Southbend. Part Number Description 1183617 FLUE BOX ASSEMBLY (for models with an oven base) 1183526 BRACKET, 36 DEEP LT FLUE RISER...
  • Page 77 LATINUM ERIES ECTIONAL ANGE Flue Riser Parts (continued) Part Number Description 1183841 SHIELD, 36" X 12" WALL AZ 1184797 SHIELD, 36" X 12" WALL SS 1183842 SHIELD, 36" X 16" WALL AZ 1185864 SHIELD, 36" X 16" WALL SS 1183843 SHIELD, 36"...

  • Page 78: Front-Rail Parts

    ERVICE Figure 43 Front-Rail Parts For custom front rails, or continuous rails spanning multiple sections, contact Southbend. Models Part Number 1184718 P12_-B 1185856 P16_-H, P16_-X 1185947 P16_-C, P16_-G, P16_-T P32_-BBB, P32_-BBB-SU, P32_-GRAD, 1184589 P32_-HH, P32_-XH, P32_-XH-RE, P32_-XX 1185677 P32_-CC, P32_-GG, P32_-TT...

  • Page 79: Shelf Parts

    LATINUM ERIES ECTIONAL ANGE Shelf Parts Part Number Description 1185870 SINGLE SOLID SHELF ASM, 12" 1185686 SINGLE SOLID SHELF ASM, 16" 1185685 SINGLE SOLID SHELF ASM, 32" 1185925 SINGLE SOLID SHELF ASM, 36" 1185687 SINGLE SOLID SHELF ASM, 48" 1185874 SINGLE TRAY SHELF ASM, 12"...

  • Page 80: Side Panel And Battery-Assembly Parts

    ERVICE Side Panel and Battery-Assembly Parts Part Number Description 1189760 BODY SIDE, RIGHT 1189759 BODY SIDE, LEFT 1189765 TRIM, 32 CABINET, RT 1189755 TRIM, 32 CABINET, LT 1189766 TRIM, 32 CABINET OPEN, RT 1189756 TRIM, 32 CABINET OPEN, LT 1189761 TRIM, 32 OVEN, RT 1188775 TRIM, 32 OVEN, LT...

  • Page 81: Leg And Caster Parts

    LATINUM ERIES ECTIONAL ANGE Figure 44 Leg and Caster Parts Part Number Description 1172650 LEG PAD (3/4 X 10 HOLE) 1146500 1/4 LOCK WASHER 1146201 1/4 X 30 X 3/4 HEX HEAD 1174260 LEG PACKAGE (set of four legs, not including bolts, leg pads, or lock washers) 1174262 EARTHQUAKE LEGS SS (set of four) 1174265...
  • Page 82 LATINUM ERIES ECTIONAL ANGE Notes: & O 1185836 R 5 (10/08) NSTALL PERATIONS ANUAL...
  • Page 83 LATINUM ERIES ECTIONAL ANGE Notes: 1185836 R 5 (10/08) NSTALL AND PERATIONS ANUAL...
  • Page 84 ANGE SECTIONAL RANGE A product with the Southbend name incorporates the best in durability and low maintenance. We all recognize, however, that replacement parts and occasional professional service may be necessary to extend the useful life of this appliance. When service is needed, contact a Southbend Authorized Service Agency, or your dealer. To avoid confusion, always refer to the model number, serial number, and type of your appliance.

This manual is also suitable for:

P32a-xxP32n-ttP32n-xxP48w-ccccP32n-ccP32n-grad ... Show all

Table of Contents