Oki C911 Maintenance Manual page 153

Oki Data CONFIDENTIAL
Item
Admin Panel Near Life Status Enable
Setup Setup
Near Life LED
Idle Display
Panel
Brightness
During
Operating
Panel
Brightness
While Power
Save
45530603TH Rev.2
Settings Functions
Sets the display control of LCD when a
Disable Near-Life warning for drum, fuser, and
belt occurs.
When enabled, displays the near- life
warning.
When disabled, do not display the near-
life warning. (Nor outputted on Attention
LED/ PJL/ MIB / Web)
The status where the device is
temporarily recovered by opening and
closing the cover after life duration error
occurs (Life warning) is not included.
Enable Sets the LED lighting control when a
Disable near-life warning of toner, drum, fuser,
belt and waste toner box occurs.
When enabled, Attention LED lights*.
When disabled, Attention LED lights
out.
The status where the device is
temporarily recovered by opening and
closing the cover after life duration error
occurs (Life warning) is not included.
*For a drum, fuser, belt, and waste
toner box, it is applied only when "Panel
Setup"- "Near Life Status" is "Enable".
For a toner, it is applied regardless of
the setting of "Panel Setup" – "Near
Life Status".
Toner Gauge Selects information displayed on the
Paper Size standby screen. When paper size is
selected, paper size in each tray is
displayed. Toner gauge is the default.
5 Adjusts the brightness of the operation
to panel LCD (backlight brightness).
31 The brightness set in this setting is
applied during the panel operation.
0 Adjusts the brightness of the operation
1 panel LCD (backlight brightness).
to The brightness set in this setting is
5 applied after a lapse of the time set by
to the panel backlight timer from the last
31 operation.
Item Settings
Admin Panel Panel Backlight 10
Timer
Setup Setup to
30
to
300
Front Lamp Mode 1
Mode 2
Off
Time Date Format yyyy/mm/dd
Setup mm/dd/yyyy
dd/mm/yyyy
Time Zone -12:00
-11:45
-11:30
-11:15
-11:00
to
-1:00
-0:45
-0:30
-0:15
0:00
+0:15
+0:30
+0:45
+1:00
to
+12:15
+12:30
+12:45
+13:00
Daylight On
Saving Off
5. MAINTENANCE MENUS
Functions
Adjusts time (second) to apply the panel
brightness while power save from the
last operation.
Sets whether to operate the lamp in the
front side of the device.
Sets a date display format.
* The default value varies depending on
the destination.
ODA:mm/dd/yyyy , OEL:dd/mm/yyyy
Sets a time zone (Difference from
GMT).
(Sets in increments of 15 min. in the
range of -12:00 to +13:00.)
Sets the summer time to On/Off.
When setting to On, set the current time
forward one hour.
When setting to Off, set the current time
back one hour.
5-12