Oki C911 Maintenance Manual page 202

Oki Data CONFIDENTIAL
Maintenance Tools:
Table 6-1-1 shows the tools necessary to replace printed-circuit boards and units in this priter.
Table 6-1-1: Maintenance Tools
No. Maintenance Tool
No. 2-200
screwdriver with
1
magnetic tip
Screwdriver No.
2
3-100
Screwdriver No.
3
5-200
4 Digital multimeter
5 Pliers
Handy vacuum
6 cleaner (toner
vacuum)
7 E-ring pliers
- Micro-Driver
8
2.0mm
Note! Use a toner vacuum. Using a general-purpose vacuum may cause the toner to catch fire.
45530603TH Rev.2
Quantity Use Remarks
3- to 5-mm
1
screws
1
1
1
1
Refer to the
1
following note.
E-shaped ring
1
removal
Paper
1 Thickness for
Adjustment
Table 6-1-2 shows the tools necessary to use Maintenance Utility software.
Table 6-1-2: Maintenance Tools
No. Maintenance Tool
Notebook personal
computer (with
1
Maintenance Utility
software installed)
2 USB cable
Ethernet cable
3
(crossover cable)
Screws in use:
Shape Designation
Screw (silver)(6mm)
Screw (silver)(8mm)
Screw (Black)(6mm)
The screw pitch is wide
Screw (Black)(8mm)
The screw pitch is wide
Round-head screw (black)(6mm)
The screw pitch is narrow
6. REPLACEMENT OF PARTS
Quantity Use Remarks
See section
5.2 for
1
Maintenance
Utility.
1
1
Use
For Metal Plate
For Metal Plate
For tree resin
For tree resin
For Metal Plate
*Don't mistake for tree resin
6-3