Boot Menu List - Oki C911 Maintenance Manual

Oki Data CONFIDENTIAL

5.6 Boot Menu List

To display Boot Menu, turn on the printer while holding down the ENTER button.
Memo Displaying Boot Menu requires entry of a password. The password defaults to six as (aaaaaa).
Option
Boot Menu Enter Password
Network Factory Defaults
HDD Setup Enable HDD
Storage Check File
Common System
Setup
Check All
Sectors
Menu Lockout
Panel Lockout
45530603TH Rev.2
Settings
************ Enters a password to display Boot Menu.
The default is "aaaaaa".
The password is six to twelve digits of lowercase alphanumeric characters
Same password as admin menu.
Execute Specifies whether to initialize the network menu.
No When HDD is damaged and cannot be activated, if setting to NO, the device can be activated by regarding HDD
Yes as non-installation, regardless of the presence or absence of HDD. If setting to NO, even when HDD is normal, it is
regarded as non installation, therefore, the access to HDD is "FAIL".
[Display conditions]
HDD is installed.
Execute Resolves a mismatch between the actual (available) and displayed available space of the file system and restores
management data (FAT information).
Executes to each file system.
[Display conditions]
- HDD is installed.
- "Boot Menu"-"HDD Setup"-"Enable HDD" is Yes.
Execute Restores improper HDD sector information and corrects a mismatch between the actual and displayed available
space of the file system.
[Display conditions]
- HDD is installed.
- "Boot Menu"-"HDD Setup"-"Enable HDD" is Yes.
On Sets ON/ OFF of the menu lockout function.
Off ON: Menus other than the authentication print/ encrypted authentication print are invisible.
OFF: Menu Lockout function does not work.
Mode1 Sets ON/ OFF of the panel lockout function.
Mode1: All keys other than ON LINE, OK, CANCEL, POWER SAVE and HELP are disabled.
Mode2
Off Mode2: All keys other than ON LINE and OK are disabled.
Off: Panel Lockout function does not work.
Function
5. MAINTENANCE MENUS
5-58