Oki C911 Maintenance Manual page 133

Oki Data CONFIDENTIAL
(2) Print speed is slow.
Check item
(1) Check the LINK lamp.
Check if the LINK Check if the HUB and a printer are connected
lamp (green) is normally.
illuminating or not.
Confirm that the straight network cable is
being used.
Make an attempt to change connection of the
network cable to other port of a HUB.
(2) Check the link status.
Print out the Check the speed of the printer and the hub
network information and also the communication mode.
to check the link
status.
45530603TH Rev.2
Actions to be taken
Check work
at NG
Re-connect the
network cable
normally.
Replace the
cable with the
straight cable.
Try to change the
HUB.
When "Hub Link
Setting" is not set
to "Auto" and also
the hub setting
that matches the
baud rate and
communication
mode to those
of the printer
is "Auto-
negotiation," set
Duplex to "Half."
(3) Web page is displayed partially.
Check item
(1) Check the settings.
Check the browser Check that the web browser security is not set
settings. to high.
4. TROUBLESHOOTING PROCEDURE
Actions to be taken
Check work
at NG
When the web
browser security
is set to high,
click [Tools] -
[Internet Options]
- [Security] -
[Trusted sites] -
[Sites] and add
the URLs of this
printer server.
Alternative,
click [Tools] -
[Internet Options]
- [Security]
- [Internet] -
[Custom level]
and click Enable
for Active
Scripting.
4-88