Oki C911 Maintenance Manual page 149

Oki Data CONFIDENTIAL
Item
Print Tray2 Overprint X
Adjust
Adjust
Overprint Y
Adjust
Tray3 X Adjust
Y Adjust
45530603TH Rev.2
Settings Functions
0.00 millimeter To the paper fed from Tray 2,
+0.25 During the second printing of spot-color
millimeter to over printing (when feeding from the
+2.00 duplex unit), adjusts the location of a
millimeter whole printing image (in 0.25-millimeter
-2.00 millimeter increments) perpendicular to the
to direction of paper movement (i.e.
-0.25 millimeter horizontally).
Print image exceeding the printable
area is clipped by this specification.
[Display Conditions]
- C941 and Tray 2 and Duplex unit should
be installed.
0.00 millimeter To the paper fed from Tray 2,
+0.25 During the second printing of spot-color
millimeter to over printing (when feeding from the
+2.00 duplex unit), adjusts the location of a
millimeter whole printing image (in 0.25-millimeter
-2.00 millimeter increments) parallel to the direction of
to paper movement (i.e. vertically).
-0.25 millimeter Print image exceeding the printable
area is clipped by this specification.
[Display Conditions]
- C941 and Tray 2 and Duplex unit should
be installed.
0.00 millimeter To the paper fed from Tray 3,
+0.25 Adjusts the position of a whole printing
millimeter to image (in 0.25-millimeter increments)
+2.00 perpendicular to the direction of paper
millimeter movement (i.e. horizontally).
-2.00 millimeter Print image exceeding the printable
to area is clipped by this specification.
-0.25 millimeter
[Display Conditions]
- Tray 3 should be installed.
0.00 millimeter To the paper fed from Tray 3,
+0.25 Adjusts the position of a whole printing
millimeter to image (in 0.25-millimeter increments)
+2.00 parallel to the direction of paper
millimeter movement (i.e. vertically).
-2.00 millimeter Print image exceeding the printable
to area is clipped by this specification.
-0.25 millimeter
[Display Conditions]
- Tray 3 should be installed.
Item Settings
Print Tray3 Duplex X 0.00 millimeter
Adjust Adjust +0.25
millimeter to
+2.00
millimeter
-2.00 millimeter
to
-0.25 millimeter
Duplex Y 0.00 millimeter
Adjust +0.25
millimeter to
+2.00
millimeter
-2.00 millimeter
to
-0.25 millimeter
Overprint X 0.00 millimeter
Adjust +0.25
millimeter to
+2.00
millimeter
-2.00 millimeter
to
-0.25 millimeter
Overprint Y 0.00 millimeter
Adjust +0.25
millimeter to
+2.00
millimeter
-2.00 millimeter
to
-0.25 millimeter
5. MAINTENANCE MENUS
Functions
To the paper fed from Tray 3,
During the front-side printing of duplex
printing (when feeding from the duplex
unit), adjusts the location of a whole
printing image (in 0.25-millimeter
increments) perpendicular to the direction
of paper movement (i.e. horizontally).
Print image exceeding the printable
area is clipped by this specification.
[Display Conditions]
- Tray 3 and Duplex unit should be installed.
To the paper fed from Tray 3,
During the front-side printing of duplex
printing (when feeding from the duplex unit),
adjusts the location of a whole printing image
(in 0.25-millimeter increments) parallel to the
direction of paper movement (i.e. vertically).
Print image exceeding the printable area is
clipped by this specification.
[Display Conditions]
- Tray 3 and Duplex unit should be installed.
To the paper fed from Tray 3,
During the second printing of spot-color over
printing (when feeding from the duplex unit),
adjusts the location of a whole printing image (in
0.25-millimeter increments) perpendicular to the
direction of paper movement (i.e. horizontally).
Print image exceeding the printable area is
clipped by this specification.
[Display Conditions]
- C941 and Tray 3 and Duplex unit should
be installed.
To the paper fed from Tray 3,
During the second printing of spot-color
over printing (when feeding from the
duplex unit), adjusts the location of a
whole printing image (in 0.25-millimeter
increments) parallel to the direction of
paper movement (i.e. vertically).
Print image exceeding the printable area
is clipped by this specification.
[Display Conditions]
- C941 and Tray 3 and Duplex unit should
be installed.
5-8