Lever-Stacker-Full - Oki C911 Maintenance Manual

Oki Data CONFIDENTIAL

6.2.11 Lever-Stacker-Full

(1) Remove the Cover-Assy-OP-Panel.(Refer to section 6.2.10)
(2) Remove the screw ① and remove the HDD cover ② .
(2) Remove the eight screws (silver) (6mm) ③ to detach the Cover-Rear ④ .
(3) Remove two claws and the Cover-Top-A ⑤ .
(4) Remove the Lever-Stacker-Full ⑥ .
Claw
Claw
⑥
45530603TH Rev.2
⑤
④
③
×8
①
②
6.2.12 Eject-Assy-Joboff/Motor-Joboff
(1) Remove the Lever-Stacker-Full. (Refer to section 6.2.11)
(2) Remove the photo sensor and disconnect the cable.
(3) Remove the two screws (silver)(8mm) ① and screw (silver)(6mm) ② and remove
the Eject-Assy-Joboff ③ .
(4) Remove the two screws (silver)(6mm) ④ , two cables and remove the Motor-Assy-
Joboff ⑤ .
(5) Remove the two screws (silver)(6mm) ⑥ and remove the Motor-Joboff ⑦ .
①
×2 ③
④
×2
⑦
⑥
×2
6. REPLACEMENT OF PARTS
②
⑤
6-15